Voltmetro amperimetro AC 4 en 1 PZEM-061

$299.00 Costo sin IVA

Voltmetro amperimetro AC 4 en 1 PZEM-061

Disponibilidad: 2 disponibles

SKU: PZEM-061 Categoría:
AC digital multi-function meter
Product type: PZEM-061
A. Function
    1. Electrical parameter measurement function (voltage, current, active power, energy)
    2. Overload alarm function (over power alarm threshold, backlight and power flashing to alarm).
    3. Power alarm threshold preset function (can set power alarm threshold)
    4. The reset function of energy key
    5. Store data when power off.
    6. Large-screen LCD (display voltagarrent, active power, energy at th e same time)
    7. Backlight function.
B. Appearance and Key function
I. Display Interface
Display interface is a large-screen LCD, it can display voltage, current, power, energy
parameters at the same time.
II.Display format
    1. Power: test range: 0~22kW
    Within 1kw, the display format is 0.0~-999.9W;
    Within 1kw-10kw, the display format is 1000-9999W;
    10kW and above, the display format is 0.1 22.0kw
    2. Energy: test range: 0-9999kWh
    Within 10KWh, the display format is 0-9999Wh
    10kWh and above, the display format is 10-9999kWh.
    3. Voltage: test range: 80-260V
    Display format: 80 260V
    4. Current: test range: 0~100A
    Display format: 0.00-99.99A
III. Key
    1. Backlight control
    Short press the key to turn on or off the backlight, the backlight has memory function, it can
    store the on or off state when power off.
    2. Reset energy
    Step1: Long press the key for 5 seconds until the number in energy display window flash, then release the key
    Step2: Short press the key again, then the energy value is cleared and exit the reset flashing state. If you don’t want to clear, then long press the         key for 5 seconds again until the number doesn’t flash, it means the energy value is not cleared and will exit the reset state.
    3. Set power alarm threshold
    Step1: Long press the key until the LCD screen display “SET CLr”, then release the key to enter the setting state
    Step2: Power window display the current power alarm value and the last digit begin to flash, then you can short press to plus 1, when there is no     operation over 3 seconds, it will switch the digit position automatically, the setting method is as same as the above.
    Step3: After finish the setting, long press the key over 5 seconds will store automatically and exit, the range of active power threshold is 0.0 22.0kw
C. Precautions
1. This module is suitable for indoor, please do not use outdoor.
2. Applied load should not exceed the rated power.
3. Wiring order can’t be wrong.
D. Specification parameters
1. Working voltage: 80 260VAC
2. Test voltage: 80 260VAC
3. Rated power: 100A/22000w
4. Operating frequency: 45-65Hz
3. Measurement accuracy: 1.0 grade

Valoraciones

No hay valoraciones aún.

Sé el primero en valorar “Voltmetro amperimetro AC 4 en 1 PZEM-061”

Tu dirección de correo electrónico no será publicada.

Shopping Cart
Escribenos por WhatsApp